Maxtor Mod各个文件的具体作用|北亚数据恢复中心(北京|深圳|上海|重庆...) 4006505808

经过数据恢复工程师的努力研究，已搞清楚了XFS文件系统的结构层。如果有基于XFS的NAS或LINUX数据出现问题，已有很大把握了。基于XFS数据恢复的软件已经完工。

站内搜索

热点文章

Maxtor Mod各个文件的具体作用

作者: 来源: 日期:2006-03-26 02:49:03 点击次数：

Maxtor Mod各个文件的具体作用
Position number
(PN), hex
Module purpose Importance
1E SRV – calibration adaptive data. A
21 RCT – adaptive information of data zone on surface. A
37 U_LIST – firmware zone translator. A
78 RZTBL – zone table. A
18 AT_PDL (P-List) – translator part responsible for P-List. A
1F DISK – drive ID. B
1B AT_POL (G-List) – growing defects table. B
39 ROM copy B
38 First part of microcode overlays B
4F Second part of microcode overlays B
95 Alternative DISK used in several Poker/Ardent drives. B
1D DMCS – translator part responsible for operations’ caching. C
2F S.M.A.R.T. thresholds. D
1A SECU – security system module (ATA passwords). D
30 S.M.A.R.T. attributes. D
70 S.M.A.R.T. Summary Log. D
71 S.M.A.R.T. Self-Test Log. D
63 Copy of S.M.A.R.T. attributes D
33 HUTIL & HUSR – pivot defects table. E
72 S.M.A.R.T. Host Vendor Log E
34 RAER_H00 E
64 MAXATG E
5E EVTLG_00 E
7B FWA E
11 MX_ST_CFG1 E
43 MX_ST_CFG2 E
0D MX_ST_CFG3 E
0E MX_ST_script E
22 Various settings (flags) E
7A U_LIST – copy of firmware zone translator E
83 Information on drive parts. E
31 DISK – second drive ID copy E
14 STRS E
35 AT_XAL E
46 OPTI – self-testing settings. E
47 STRS E
48 Information on drive parts. E
Codes of the ?Importance? column in Table 2:
A – essential and must have version corresponding to the specific head-and-disk assembly;
B – yes, necessary, but can be replaced with one from another drive;
C – yes, necessary, but partial module corruption does not prevent drive from starting;
D – without one the drive starts normally but considerably slower than a totally operational drive;
E

上一篇：MOD识编号
下一篇：LDR的内含