Discharge Smart- of the variables
After the repair of accumulator frequently appears the need for throwing out Smart- variables and Smart- the ravines of the repaired disk, which contain the information, accumulated in the period of the operation of disk with the malfunction. For this follows vospol'zovat's 4 by point of menu Actions - > Clear SMART.
Removal Ata- the password
For the removal established Ata- password it follows to use the point of the menu
Actions - > Unlock.
Restart of the accumulator
Sometimes can arise the need for perezagruzit' accumulator. In this case, if accumulator is found in the readiness on Ata- to interface, it is possible to use point Reset->.Super. To accumulator will be fed the command of the complete reloading of mikroprog of rammy.
Work with Vendor- by the region of the accumulator
In accumulators Seagate Ux by the developers of predusmot of run region for "personal P of repiski" of service engineers. This region, is more accurate, its first half, in no way not ispol'zuyets 4 in the work of accumulator, but it is accessible through Ata- interface and makes it possible to bring in all possible records. For example, in it it is possible to note the date of the entering of accumulator in the repair, the method of repair and the date of the beginning of warranty period. With the guarantee recovery of nakopitel 4, after reading these records (from the accumulator itself!) You can either refuse in the guarantee (if elapsed warranty period), or make conclusions about tselesoob of difference and to the procedure of further repair.
Access to Vendor- to region is effected by means of menu Actions - > Vendor Data.
Part Vendor- of region, located in its end itself, overlaps the modulus of the table of defects. Therefore to write in Vendor- the region of rekomenduyets 4 only into its first half.
Debugging
In the process of work the utility, for the technological reasons, produces automatic izmeneni 4 of some parameters of accumulator. Therefore the interruption of the standard work of complex leads to all possible problems in the work as that:
? the impossibility of passport change, its discharge to the values on - to silence;
? hanging up upon the concealment of defects;
? the impossibility of access to Smart- to monitoring;
? the incorrect determination of the logical parameters.
The most characteristic feature of the malfunction of the subsequent in view of nekor rektnoy work with the complex is the incorrect determination of the parameters of logical sect ditch: instead of the stand of rtnogo value 63 ravine sektora in the window of accumulator will be present another number. In this case one should act on the following algorithm:
16. To perezagruzit' the accumulator through point Reset->.Super, or by the disconnection of nourishment;
17. To remove from the accumulator the possible password through point Actions - > Unlock;
上一篇：HRT的Seagate Drives U6英文说明书
下一篇：HRT安装技巧经验 |
相关文章