HRT的Seagate Drives U6英文说明书

Utility makes it possible through  Ata- interface to read and "to stitch through" the microcircuit of flesh - PZU by means of dialogue  Actions->.Flash operations.
 
Designation of the knobs of the dialogue:
Read from HDD  reads flesh - PZU from the accumulator.
Write to HDD  "will be pierced" the microcircuit of flesh - PZU.  Remember that the microcircuit is stitched through to  45  seconds.  Do not turn off nourishment, until accumulator anew drives away disks!

Load from file  and  Save to file, correspondingly,  reads into the buffer and preserves from bufe of the Ra given in / from the file.
Recalc CRC  Is intended for the conversion of the check sum of flesh - PZU. This can prove useful, if you introduced what - that change in the regime of dump or with the aid of the external editors.
Dump  it makes it possible for you to look over the dump of contained PZU located in bufe Re of utility and to introduce into it what - or change.

Lower than the knobs is arranged window stake - VA of bytes in the buffer and the flag of correctness Comte the rolled sum.
Work with the official region
General information
The official region of accumulators  Seagate U6  contains the moduli, necessary for the work of accumulator in the user regime. The part of the moduli contains the usable program code, podgruzhayemyy in OZU for the fulfillment on me Re of the need for work. Another part contains tuning accumulator and identification information.
During the repair access to the necessary in the work official moduli of osushchestvl of yaetsya through interface  ATA  by means of dialogue  P -.operations.
In the official zone so are contained the ravine of the plant testing of accumulator, interface inaccessible  through Ata-. But since the work of accumulator it does not influence, then the developers of user microprogram did not attend to by the possibility of its reading che cut  Ata- interface. So it should be noted that a change (record) in the part of the moduli blocks ruyet accumulator itself, to avoid their spoiling.
T k. the microprogram of accumulator Seagate U6 supplied  from the plant  is designed only for the work of disk in the user regime, then in it are not provided the methods of restoring the accumulator through  Ata- interface with the spoiling of some overlay moduli.  We imperatively recommend not to copy moduli  Seagate U6  by the moduli of another accumulator of these models without the emergency!
Each disk modulus is stored in the official region of disk in several cut rvnykh copies –from  2  to  8  copies to one physical surface, depending  on the criticality of the loss  of this modulus.

For the part of the moduli is provided the presence in title of signature (for example,  SYS1, SYS2, OACT)  and check sum of modulus. Accumulator, checks these parameters during an attempt  at the record of modulus  and with their tactlessness simply he will not write down modulus; however, it can not report error.