? % r – the version of the micro-code, bears as soon as two first fields of complete version! For polucheni of 4 complete versions of the micro-code it is necessary to look the code of family. It is left for the compatability with other accumulators. Example: rev_3_07.
? %.f – code of family, the complete version of mikr of oprogrammy of accumulator, unambiguously it is described by 4 within the limits of model. Example: fcode_1_04_056-03_07_064_17.
? %.n – plant address. It can be useful in the case of guarantee elevation of rata (if you will write all official regions of those passing che cut your hands of accumulators). Example: SN5JZ04BD7.
File SConner..INI
Section [ MODELS ] determines the rules of the reference of concrete models to the families. Selection goes on the version of the micro-code. In the standard delivery, all known to the authors versions refer in one and the same section [ Ux ]. If you want to make more detailed division into the families with the more fine adjustment the separation must be produced precisely at this level.
Section [ LOGICAL ] contains the reference book of the standard models of accumulators. It is possible to supplement independently it, adding the names and the logical parameters of necessary models.
Section [ GENERAL ] can contain the base tuning of utility, necessary for the normal operation with accumulators Seagate Ux.
Section [ CP LIST ] soder of zhit parameter max CP, which determines the number of maximum modulus which will be preserved in the file of resources. The standard value of this key for Seagate Ux is such:
Max CP=222
Nominal sections –this of the section of the description of families. The names of sections must coincide with those, coto bark to rye are assigned in the section [ MODELS ].
In any of the nominal sections the following keys are possible:
CP TimeOut Is determined the maximum waiting time of the readiness of accumulator during reading CP in milisekundakh.
CP LIST Is determined the enumeration of the moduli of official region, which are subject to readout. The fact is that the turning to certain of the moduli, causes the "hovering" of nakopitel 4 and is necessary to exclude them from the work.
For the savings of place, can be assigned both the concrete moduli and ranges. Thus, for instance, record by 1,2,3,4 it indicates: "to place in the list moduli with numbers 1, 2, 3 and 4", but record by 1-4 indicates the same. But record by 1-4,10-20 indicates "to place in the list moduli with the numbers from 1 to 4, and also from 10 to 20 inclusively".
The standard value of this key for Seagate Ux is such: CP LIST = 0-40,221
Additional possibilities of the utility
Discharge Smart- of the variables
上一篇：硬盘维修工具－ＨＲＴ
下一篇：HRT的Seagate Drives U8, V8, U10英文说明书 |
相关文章